Translate This Page

Hyperglass Exterior

 
So waterproof it can be used to coat swimming pools and tubs.  So reflective it cools roofs and patios by up to 50 degrees. Learn more...
Print


Easiest Application

With the all new easy squeeze applicator, Hypercaulk is able to be applied easier than any crack filler of its kind. Forget about hassling with a trowel or caulking gun, they waste time and create unnecessary clean-up. Just squeeze the material directly into the crack, it will flow down into the crack filling it and because of it's unique properties it will self-level and form a perfect bead along the surface. When the job is done simply put the cap back on and store it for later use.
Squeeze.
Fill.
Cap.
Store.

In a League of it's Own

When asphalt begins to deteriorated caused by hot & cold weather, rain, solar radiation, and vehicular traffic the initial degradation becomes visible by surface cracking. Most caulks that are designed to protect repair these cracks are composed of similar asphaltic compounds and are subject to the same environmental damage. This causes the surface to fail making it subject to costly resurfacing. However, being composed mainly of recycled rubber and binder, Hypercaulk is extremely resistant to the environmental forces that deteriorate asphalt and asphaltic crack fillers. It cures to a solid, flexible rubber caulk.


SPECIFICATIONS  |  MSDS:  ENG

ADDITIONAL FEATURES

  • Paint-able
  • Trowel-able
  • Over 50% recycled rubber by volume
  • Cold weather application (down to 45° F)
  • Doesn't require special solvent for cleaning

SPECIFICATIONS

  • RESIN TYPE: Acrylic Water-base
  • COVERAGE: Varies
  • DFT (Dry Film Thickness): up to 1000 mils
  • CURES: 48-72 hours

TYPICAL USES
Filling cracks in roofs, driveways, parking lots, tennis, basketball, and volleyball courts.

ADHERES TO
Wood, metal, concrete, asphalt, rubber, brick, tile, plaster, and more.


Similar Products