Translate This Page

Print


Easily Fills Cracks & Leaks

Because of Hyperflex® Rubber Pool Primer's unique properties it is able to be applied by a contractor or a homeowner to fill small gaps and coat evenly over joints, seams, fixtures, and other weak areas. It can be brushed, rolled, or sprayed on and cures to a hard and durable rubber liner.

Synthetic & Chlorinated ≠ Rubber

Typically there are two kinds of rubber-based paints for pool liners. They are chlorinated & synthetic. Hyperflex® offers the same advantages as these two but without the baggage. Synthetic rubber-based pool paint is toxic and prohibited in many states in the U.S. and neither of the two paints retain rubber properties. Hyperflex® Rubber Pool Primer is an acrylic, non-toxic coating infused with recycled rubber. The recycled rubber gives it enhanced properties that creates an inner-tube-like membrane that can be applied like regular paint. And, not only that, it also is helping divert waste tires from landfills by utilizing recycled rubber (powder).



DIRECTIONS FOR USE   |  TDS   |   MSDS: ENG : ESP

KEY FEATURES
  • Paint-able
  • Over 50% recycled rubber by volume
  • Cold weather application (down to 45° F)
  • Easy to apply/ maintain
  • Quick-cure
  • Good for pools or spas

SPECIFICATIONS
  • RESIN TYPE: Acrylic Water-base
  • COVERAGE: Approximately 100 sq. ft./ gal/ coat
  • DFT (dry film thickness): 7-8 mils
  • CURES: 72 hours
  • NOTE: Must be used in conjunction with Hyperglass® Pool Coating

ADHERES TO:
Plaster, fiberglass, concrete, gunite, tile, metal, and marcite in salt or fresh water pools.



Similar Products